Current Location: HOME » product » POE Switch » Layer 2/2+ Managed POE Switch » Gigabit POE Switch
Gigabit POE Switch

16*1000M PoE Ports + 2*1000M SFP Ports Managed Switch


* Support enhanced management through WEB, CLI, TELNET, SSH, SNMP

* 0 C To 55 C operating temperature to meet a variety of complex environments

* Copper ports support ESD protection

* Support PoE power supply up to maximum of 30W per port

* IEEE 802.3af and 802.3at. Supports per port PoE configuration function

  • Overview 

    NT-35MG16T2GF To satisfy the increasing demand of PoE for gigabit Ethernet (GbE) networking, N-net has developed this series of PoE GbE switch. The NT-35MG16T2GFL provides an ideal solution for LAN implementation. This product is equipped with (16)10/100/1000M Base-T gigabit Ethernet RJ45 ports, supporting IEEE 802.3af/ at standard and 1000Base-X SFP interfaces. The scroll mode shows the port state, showing the 16 ports PoE state, the residence time is about 5S, according to the data display real-time to update PD end user PoE power, state monitoring and troubleshooting, simplify the wiring, and avoid the power socket of the power supply equipment.

    The NT-35MG16T2GF supports 360-watt PoE budget to drive up to 16 powered devices, with up to 30W of MAX power per port. The PoE feature enables the NT-35MG16T2GF an efficient and cost-effective solution for SMB, SOHO or other similar fields to deploy the PoE network for the wireless access points, IP-based surveillance cameras or IP phones anywhere easily and efficiently.


    PoE for Gigabit Ethernet (GbE) Networking

    * Built-in efficient switching core to implement flow control and reduce broadcast packets

    * Standard Compliance?IEEE802.3 Ethernet,IEEE802.3u Fast Ethernet,IEEE802.3ab Gigabit Ethernet

    IEEE802.3x Flow Control,IEEE 802.1p QoS

    * 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X, compatible with various Ethernet devices

    * Support L2+ switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMPSnooping,

    * DHCP Snooping, LLDP, POE+ management, IP Source Guard, ARP inspection, ACLs etc.

    * Store-and-forward mechanism is employed to avoid packet loss and error frames

    * Support spanning tree STP(802.1D) and RSTP(802.1W).

    * G.8032, support <50ms industrial quick ring protection

    * Jumbo frames support a maximum of 9.6K kilobtyes

    * Support cable diagnosis

    * Support enhanced management through WEB, CLI, TELNET, SSH, SNMP.

    * 0 C To 55 C operating temperature to meet a variety of complex environments

    * Copper ports support ESD protection

    * Support PoE power supply up to maximum of 30W per port

    * IEEE 802.3af and 802.3at. Supports per port PoE configuration function

  • Hardware Specification



    Access mode



    IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet,

    IEEE802.3ab Gigabit Ethernet,

    IEEE802.3x Flow Control,

    IEEE 802.1p QoS IEEE 802.1D STP,

    IEEE 802.1w RSTP,

    IEEE802.3af PoE, IEEE802.3at PoE+,

    10/100/1000 Base-T ports

    16 ports  EIA568A/B

    1000 Base-X

    2 ports SFP

    Conversion means

    Store and Forward

    Switch Fabric


    Switch Throughput

    26.8Mpps@64 bytes

    G.8032 ERPS

    <50ms ring protection for industrial high reliable application

    Address table



    Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs)

    Port-based VLAN

    802.1Q tag-based VLAN


    Link Aggregation Control Protocol (LACP) IEEE 802.3ad

    Up to 12 groups

    Up to 16 ports per group


    30,000 hours

    LED indicator

    Power Supply : PWR

    (1~24)UTP Port: SPD, L/A, PoE

    Power supply

     Power Input Range: 100~240V AC            

    Power Requirement

    100~240V AC, 50/60Hz, 4A

    Power Capacity


    PoE Power Pins

    RJ45 Pins 1 and 2 for PoE(+); 3 and 6 for PoE(-)

    Operating temperature

    0 C ~+55C

    Operating humidity

    5%~90%  non-condensing

    Storage Temperature


    Storage humidity

    5%~90%  non-condensing


    440 x 280 x 44.5 (mm)




    Layer 2 Function



    Port Configuration

    Port disable / enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection

    Flow Control disable / enable

    Port Status

    Display each ports speed duplex mode, link status, flow control status,auto negotiation status and trunk status

    Port Mirroring

    TX / RX / Both
    Many-to-1 monitor

    Port Security

    Locks MAC Addresses to ports, and limits the number of learned MAC



    Support for up to 256 entries

    Drop or rate limitation based on source and destination MAC, VLAN ID

    or IP address, protocol, port, differentiated services code point (DSCP) /

    IP precedence, TCP/ UDP source and destination ports, 802.1p priority,

    Ethernet type, Internet Control Message Protocol (ICMP) packets,IGMP packets, TCP flag

    Link Aggregation

    1 group of 2-Port 10/100/1000Base-T trunk supported


    Allow to assign low / high priority on each port
    First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy

    IGMP (v1/v2) Snooping

    IGMP limits bandwidth-intensive multicast traffic to only the requesters;

    supports 1024 multicast groups (source-specific multicasting is also


    Security Control

    MAC address binding

    TCP & UDP filter


    Management Functions



    Basic Management Interfaces

    Web Browser, SNMP v1

  • Application



    Order Information




    Management Gigabit Ethernet PoE+ Switch, (16) 10/100/1000Mbps downlink PoE Ethernet Ports, (2) 1000Mbps uplink SFP Ports, POE output IEEE802.3af standard


  • NT-35MG16T2GF-AF16-en.docx